Temperature Data Logger With SD Card Module | SekhoHub |
Hi friends in this video I’m going to make a temperature logger using aduino .
let’s see the connections of the project .
- First connect Arduin.
- Then connect a two- pin terminal block and connect its one pin to five full pin of Arduino and its other pin to ground.
- Then connect a 16×2 LCD and connect its VCC pin to 54 pin of Arduino it’s ground pin to ground it’s SDA pin to A4 pin of Arduino and it’s sdl pin to A5 pin of adino.
- Then connect a push button and connect it’s one one pin to D3 pin of ardino and its other pin to ground .
- Then connect another push button and connect its one pin to D4 pin of arino and its other pin to ground.
- Now connect another push button and connect its one pin to D5 pin of Vino and its other pin to ground .
- Now connect the temperature sensor and connect its VCC pin to 5f pin of hardino its ground pin to ground and its data pin to D2 pin of arbino.
- Now connect the SD card module and connect its VCC pin to fivefold pin of arbino it’s ground pin to ground it’s CS pin to d10 pin of arbino it’s sck pin to D13 pin of Arduino it’s MOSI pin to d11 pin of Arduino and it’s m openin to D12 of arbino.
So we have completed all the connections now let’s upload the code to adino and test the project.
So that’s it for today’s Project I hope you have enjoyed this video for more Project like that stay tuned and I will see you in the next Project.
Temperature Logger Setting